OIL FIELD CARBON STEEL BALL VALVE BOLTED
- Size Range:
- 2“ to 4”
- Body Materials:
- WCB A105 / 4130
- Temperature Range:
- -50℉ to 450℉ (-46℃ to 232℃)
- Stem Materials:
- 400 SERIES STAINLESS STEEL
- Maximum Allowable Operating Pressure:
- 3000 PSI (WOG) - 5000 PSI(WOG)
- Seat Materials:
- Delrin / Peek
- Body Style:
- Two Piece
- Ball Materials:
- 400 SERIES STAINLESS STEEL
- End Connections:
- Threaded ASME B1.20.1 NPT / API 5B LP
- Design Standard:
- ASME B16.34 , MSS SP-110,API 6D,API 608
- Ports:
- Full Port/ Reduced Port
- Testing Standard:
- MSS-SP72,API 598
- Applications:
- General Service, Air, Water, Oil & Gas
- Face to Face:
- Manufacturers Standard
This is a ball valve for oil field, including a ball valve body and a valve tube. The left and right sides of the ball valve body are equipped with valve tubes. The right side of the inner cavity of the ball valve body is equipped with a second slide rail. The valve rod runs through the ball valve body. A stable block is installed at the top of the valve rod, a handwheel is fixedly installed at the top of the stable block, and a limit device is installed in the inner cavity of the valve rod.
Description
Structural Features
Back-seated stem blow out proof and fire safe
External stem lubrication and vented weather seal
SS trim for maximum corrosion protection
Available in both full and reduced port configurations
Ball includes pressure equalization hole to prevent
trapped pressure in the body cavity
Standard locking handle to meet safety and security
concerns with double locking feature for tank valves
NACE MR0175
lnspection and Test:API598
2500,3000 psi body with WCB material. 2RP,
2FP,3FP 5000 psi body with 4C material
Materials of main parts
| No | Part | Matarial | |
| 1 | BODY | ASTM A216 WCB | ASTM A487 4C |
| 2 | BODY SEAL | VITON | |
| 3 | BOONET | ASTM A216 WCB | ASTM A487 4C |
| 4 | SEATS | DELRIN | |
| 5 | BALL | ASTM A276 420 | |
| 6 | STEM | ASTM A276 420 | |
| 7 | THRUST BEARING | PTFE | |
| 8 | STEM SEAL | VITON | |
| 9 | STEM SEAL | VITON | |
| 10 | STEM BEARING | PTFE | |
| 11 | STOP PLATE | CS+Ni | |
| 12 | PIN WITH CHAIN | STAINLESS STEEL | |
| 13 | RETAINER RING | SPRING STEEL | |
| 14 | STOP PIN | SPRING STEEL | |
| 15 | SCREW | CARBON STEEL | |
| 16 | GREASE ZERK | CARBON STEEL | |
| 17 | HANDLE | DUCTILE IRON | |
| 18 | CAP SCREW | A193 B7M | |
Dimensions(in)
| Size | Port | L | D | D2 | d | H | Lo | Weight (Lbs) | Torque (in.Lb) |
| 2” | RP | 5.5 | 4.92 | 3 | 1.5 | 4.94 | 10 | 13.12 | 1750 |
| 2” | RP | 5.5 | 4.92 | 3 | 1.5 | 4.94 | 10 | 13.12 | 2700 |
| 2” | FP | 5.75 | 5.91 | 3.13 | 2 | 5.32 | 10 | 19.6 | 2350 |
| 2” | FP | 5.75 | 5.91 | 3.13 | 2 | 5.32 | 10 | 19.6 | 3850 |
| 3” | FP | 8.13 | 7.87 | 4.53 | 3 | 7.31 | 20 | 48.94 | 4100 |
| 3” | FP | 8.13 | 7.87 | 4.53 | 3 | 7.31 | 31.5 | 49.93 | 7080 |
Factory Show
